Views: 0 Author: Site Editor Publish Time: 2022-09-27 Origin: Site
Grinding and dust removal workbench is one of the most advanced pulse injection filter dust removal machine.
It is suitable for grinding wooden products, iron products, chemical products and other work-pieces. It the advantages of convenient operation, low noise, safety and reliability, and good dust removal effect.
The following is the introduction of how it works
Features of the dust removal and grinding workbench structure
The dust generated by the operator during the grinding process enters the grinding table box through the small holes of the table top through the negative pressure airflow, and then filtered through the filter element, and finally the clean air enters the upper box through the fan.
Under the action of the uniform distribution of the punching pieces of the top box, the down pressure air is generated to form a circulating air duct to ensure the grinding and dust removal effect.
During the filtration process, most of the dust is trapped by the filter element and adheres to the outer surface of the filter element. With the increase of dust on the outer surface of the filter element, the pulse jet valve releases the compressed air in a very short time (0.1s-0.2s) under the action of the time relay. Under the action of the spray pipe, a large amount of secondary air is introduced, so that the filter element rapidly expands and shakes to achieve the purpose of cleaning dust.
Equipped with a powerful pulse cleaning system, the SD series workbench can operate safely, continuously and reliably under low resistance conditions.
1. There is a guide plate at the air inlet of the suction table to prevent dust from directly impacting the filter element and prolong the service life;
2. The high-efficiency centrifugal fan is selected, which has the characteristics of stable operation and remarkable efficiency;
3. In order to avoid noise pollution, the fan adopts noise reduction treatment;
4. The utility model has the functions of workbench and dust removal, which can directly eliminate dust from the source of dust generation;
5. Compact structure, small footprint, can work in two or more stations at the same time;
6. The filter can be selected according to the nature of the user's handling of dust to meet the dust filters of different properties;
7. The filter element has long service life, stable function and easy replacement;
8. The front and top of the workbench are provided with air suction ports, which can effectively control the flying of dust;
9. Equipped with a new type of low-noise fan, the suction volume remains unchanged and the noise is lower. Ensure the physical and mental health of operators;
10. Pulse blow back cleaning system ensures that the equipment is always in a clean working state;
11. Drawer type dust removal box, easy to remove dust.
Dust removal grinding table is mainly used for cutting dust removal and grinding and polishing of metal work pieces with burrs.
It is widely used in mold factories, machinery manufacturing plants, building materials industry, metal processing industry and other industries to clean and collect dust particles generated in the grinding process, purify the air in the manufacturing plant, reduce dust floating in the air, and change the dust in the workshop!
sales@liweihb.com |